Version
- New:
-- Added Altitude Lines to Approach View
-- Added Lat/Lng Text to Analog Scope -> Clicking it, allows to set Lat/Lng Position
-- Analog Scope range setting can now be adjusted with the mousewheel

- Changed:
-- Improved rendering of targets on the Approach View (including X for lost targets)
-- Target Labels: Climb/Descend-Arrow now dependend on "baro_rate", and not "geom_rate"

- Fixed:
-- Target Labels and Target Trails could not be turned off
-- Lost targets would not disappear from Analog Scope (Thanks Kjell!)


Version 1.0.154.3902
- New:
-- Windows -> Approach View will now show a position based suggestion for opening approach view without having to manually find airports/runways anymore
-- Right clicking an extended RWY Centerline while holding CTRL will open the approach-view for that runway

- Changed:
-- Changed Approach View user interface -> Removed Region/Airport selection
-- Slight performance improvement when drawing large number of targets
-- Slight performance improvement when dragging map
-- Approach View QNH Input now allows for both hPa and inHg input
-- Approach View QNH can now be adjusted by scrolling the mousewheel

- Fixed:
-- Version check will no longer show "Up to date" after showing that it is no longer up to date
-- Removed stuck targets/labels that occured in some cases


Version 1.0.152.33347
- New:
-- WX Overlay Opacity is now adjustable
-- When feeding the OpenSky Network, it is now possible to poll your own receiver(s) remotely (requires you to enter your OpenSky Credentials)
-- Local Data Path can now be set in the options (By Default: User/Documents/PlaneTrackr/)

- Changed:
-- Reworked the way targets, target data blocks and target trails and history lines are drawn on scope
-- Increased the Data Download Range for ADSBExchange Online data -> At higher Scope Range aircraft on the edge of the screen are visible now

- Fixed:
-- Target Leads were two long by a factor of 2x

Version 1.0.149.21242
- New:
-- When using ADSBExchange Data, a MessageBox will inform you when you have reached the included quota of 10.000 API calls included in the base price.

- Changed:
-- Update MessageBox now will allow to jump to the downloadpage directly by clicking OK.
-- OpenAIP Data regionally incosistent -> Airspace filtering has been adjusted (further adjustmens will be necessary down the line)

- Fixed:
-- PlaneTrackrConfig.xml now shows correct version numbers.
-- Switching WX overlay from one source to OFF and back to the same source would not show any weather overlay until the map was moved or source was changed again.
-- Target Labels would no longer disappear during AutoDeclutter (Range > 100NM)
-- History Line could not be removed if a target was lost from scope


Version 1.0.148.4308 
- New:
-- Added Weatherradar image to map
-- ADSBExchange Options Page now shows how much data has been used

- Fixed:
-- Removed unnecessary text lenght limit on aircraft.json path for local receivers

- Changed:
-- Adjusted Status-Bar to show Online Data Count and Local Receiver Data Count
-- Adjustments to the Options Page UI


Version 1.0.146.19627
- Fixed:
-- Removed Roadrunner (Beep sound) from code

Version 1.0.146.6081
- Fixed:
-- Airspaces not showing up on computers set to English.
-- Range rings on digital radar would not disappear.


Version 1.0.144.24945 - HOTFIX
- Fixed:
-- Resolved Crash during Programm Launch on some Computers


Version 1.0.143.41954
- New:
-- Approach view now allows for pressure altitude correction - QNH Input possible.
-- Speed Filters and Highlight Filters added.

- Changed:
-- Adjusted the receiver panel. Now full path input to aircraft.json is required. Allows for more receiver software configurations. Thanks to @dziban
-- Changed Logging for better diagnostics. Log files no saved in Documents/PlaneTrackr/Logs/

- Fixed:
-- Manuall checking for updates would lead to a programm crash.
-- Targets trail were offset from target symbol at certain zoom settings (dependend on Lattitude).


Version 1.0.142.30905
-New:
-- Possibility to use Local Receiver running TAR1090 - thanks to @wiedehopf! (https://github.com/wiedehopf/tar1090)

-Changed:
-- Target trail logic adjusted, to accomodate higher polling rate of local receiver
-- "Loopback" of OpenSky receiver (Options -> Data -> OpenSky) might not be working - currently not recommended

-Fixed:
-- Bug were a invalid data access could cause a crash
-- Removed unnecessary update of invisible controls
-- Fixed identity crisis in Splash Screen
-- Fixed wrong GroundSpeed when using ADSBExchange data


Version 1.0.141.32355 - 22.05.2022
- Data:	ADSBExchange is now available as a data provider - Requires API Key
- Data: It is now possible to provide OpenSky Account Information to poll own receivers at a higher rate (This feature is in testing - Thanks to @thebaldgeek for his help)
- Approach View: ICAO Code is no longer case sensitve
- Analog Scope: Added button to leave borderless mode
- Main Window: Minor UI Adjustments
- Implemneted Flight Information API from Josh Douch (https://api.joshdouch.me/) 
	-> Some Aircraft now show Registration Code and Type in the Data Panel and the Data Strip
	-> Some Flights now show Departure and Destination Airport ICAO Codes in the Data Panel and the Data Strip
	
	

Version 1.0.139.32764 - 20.05.2022 
- Release of PlaneTrackr